Guide · Logo

Embroidery or printing for your uniform logo?

Which method suits each garment, logo and fabric, and where logos usually go, explained by the team at our embroidery machines in Ajman.

  • 6 min read
  • 8 parts
  • 10 Nov 2026

Written by our embroidery team · Start reading

Row of embroidery machines stitching uniform logos in our factory
EmbroideryIn our own factory
PrintingBy partner print houses
01The short answer

Thread for small logos, ink for big designs

Most uniforms carry a small logo on the chest, and embroidery suits that best: it is stitched into the fabric and keeps its look through daily washing.

Printing wins when the design is large, has many colours or shading, or the fabric is a thin T-shirt or a sports jersey. Many uniforms use both: an embroidered logo on the front and a printed design on the back.

Logo being embroidered on navy uniform fabric
1

Small logo on the chest

Polos, shirts, chef coats, caps

Embroidery
Hoodie front with an embroidered chest logo spot
Hoodie back with a printed design spot
2

Logo front, design on the back

One uniform, two methods

Both
T-shirt back with a large printed design spot
3

Large design on the back

T-shirts, jerseys, hoodies

Printing
02Embroidery

How logo embroidery works

Your logo is turned into a stitch file, and our multi-head embroidery machines sew it with thread straight into the garment, many pieces at once. It suits polo shirts, formal shirts, chef coats, scrubs, blazers, jackets and caps.

Thread comes in solid colours, so shading and photo-like artwork do not stitch well, and very small text can close up. When that happens we suggest a cleaner version of the logo and show it on your free artwork.

Part of the fabricStitched in, so it cannot peel or crack.
Made for washingKeeps its look through the frequent washing uniforms get.
Names tooStaff names stitched piece by piece.
Embroidery machine needles stitching a design on navy fabric in our factory
In-houseembroidered in our
own factory
03Printing

Four ways to print a uniform logo

Printed by our partner print houses, planned and checked by our team.

Screen printOne design, few coloursInk pressed through a screen, one screen per colour. Bright and even on larger quantities.
DTFMany colours, fine detailThe design is printed on a film, then pressed onto the garment. Works on cotton and polyester.
Heat transferNames and numbersReady-cut lettering pressed with heat, one piece at a time.
SublimationAll-over colourDye goes into light polyester fabric, so nothing sits on top. Used for sports jerseys.

Choose print when

  • The design is largeA full back or front design stays light as a print.
  • It has many colours or shadingPrint keeps gradients that thread cannot.
  • The fabric is thin or stretchyT-shirts and jerseys stay soft and flat.

Keep in mind

  • Sublimation needs polyesterIt works on light polyester, not on cotton or dark fabric.
  • Follow the care labelDo not iron directly on a print; turn the garment inside out.
  • Checked by usPrinted pieces come back to our factory for the final check and packing.
04Compare

Embroidery and printing side by side

The same six points, answered for each.

Embroidery

Look
Raised thread with a premium finish
Detail
Clean, bold shapes and solid colours
Size
Small to medium: chest, sleeve, cap
Feel
Firmer where it is stitched
Names
Embroidered name on each piece
Made
In our own factory

Printing

Look
Flat, smooth colour
Detail
Fine lines, many colours and shading
Size
Any size, up to a full back
Feel
Soft and light
Names
Heat-pressed names and numbers
Made
At our partner print houses
05Find your method

Which one fits your uniform?

Choose the garment and the kind of logo. The answer is the method we usually suggest for it, from orders made in our factory.

Not sure? Send us your logo. We show the method, size and colours on your free artwork in 1 to 2 days, before anything is made.

1. Garment
2. Your logo
We usually suggestEmbroidery

A small logo is where thread looks best: sharp, raised and long lasting through daily washing. Done in our own factory.

See our polo shirts
06Logo position

Where logos usually go on a uniform

The usual places and the width we start from. Your free artwork confirms the final size.

Polo shirt front with the usual chest logo positions marked
Front
Polo shirt back with the usual back logo position marked
Back
  • Left chestabout 8 cm
  • Centre chestabout 10 cm
  • Right chestabout 8 cm
  • Sleeveabout 6 cm
  • Backabout 25 cm
  • Widths are where we start; any size can be agreed. Place your logo yourself in our online uniform designer.

07Step by step

From your logo file to the finished uniform

The same steps for embroidery and printing.

  1. Send your logoAI, PDF or EPS is best. A sharp PNG also works.
  2. Free artworkIn 1 to 2 days: method, position, size and colours on your garment.
  3. Stitch or print fileMade from the artwork you approved, so the result matches it.
  4. Checked and packedEvery piece checked, packed by size or by name.
08A clean result

Tips for a logo that looks right

  1. Send the original file, not a screenshot or a photo of a printed logo.
  2. Tell us your logo colours, with colour codes if you have them. Thread and ink colours are shown on the artwork.
  3. Keep small spots simple. On a chest or sleeve, a shorter logo without a long tagline reads better.
  4. Plan the whole set together, so shirts, polos and jackets carry the logo in the same place.

Your logo files stay on file with us, so re-orders and new joiners get exactly the same logo. See how it is made on our factory page.

The same crest embroidered on one piece and being stitched on the next in our factory
Same logoon every re-order,
same place, same size
09Questions

More questions about logos

Ask on WhatsApp
Which lasts longer, embroidery or printing?

On uniforms that are washed often, embroidery usually lasts longest, because the thread is stitched into the fabric. A good print also lasts well when the care label is followed.

Is embroidery done in your own factory?

Yes, on our multi-head embroidery machines. Printing (screen, DTF, heat transfer and sublimation) is done by our partner print houses.

Can one uniform have both embroidery and print?

Yes. A common choice is an embroidered logo on the chest and a printed design on the back.

Can you add staff names?

Yes. Names can be embroidered piece by piece, or heat pressed on T-shirts and sports jerseys. Send the name list with the sizes.

What logo file should I send?

A vector file (AI, PDF or EPS) is best. A sharp PNG also works; we check it and show the result on your free artwork.

Will I see my logo before production?

Yes. The free artwork shows the method, position, size and colours, and production starts only after you approve it.

11Get a quote

Send your logo and quantity

  1. Tell us what you needGarments, quantity or a visit date
  2. We reply within 24 hoursMonday to Saturday, 9 am to 7 pm
  3. Visit, sample, then bulkSee your order made in the UAE
WhatsApp

Your details are used only to answer your request.